Bring an extra level of realism to your Star Wars or ‘Othere Character’ costumes and smiles to the faces of those you interact with. Each unit can take upto 50 sounds (depending on character).
Note – this is a single profile device. For multiple profile requirements our PRO Elite model can have upto 6 characters installed at once.

The materials we use are meant to last. The buttons are a closed unit ensuring no corrosion from sweat.
The board is slim and protected by heat wrap.

A 3.5mm Aux cable and micro usb cable are also included. All you will need is a power bank and speaker with aux input. Further information can be found here – https://engagecosplay.com/engage-5-instructions/

We recommend either of these power packs –
Anker Power Bank, Ultra-Compact 5,200mAh
Anker Power Bank, 313 Portable Charger (PowerCore Slim 10K)

The unit is classed as a low power co summation device and many powerbanks do not recognise use this and auto shut off.
The above recommended power banks have a trickle mode to prevent auto shutdown.

Please visit our social sites for pictures and video demos of the rig in action.
YouTube – https://www.youtube.com/@EngageCosplay
Facebook – https://www.facebook.com/EngageCosplay

Disclaimer:
This product is a fan-made cosplay accessory. It is not affiliated with, endorsed by, or licensed by Disney, Lucasfilm, or any other company. All character names, trademarks, and copyrights are the property of their respective owners. Any names or terms used are for descriptive purposes only.

The post Engage 5 Button Sound Rig | Various Characters to Choose from appeared first on Engage Cosplay.

You can select to have the PCBs with components or on their own to source the parts yourself. Full instructions from start to finish are included.

PCB’s will be posted to you – STL files, Instructions and Reference material will be sent via email.

Other electrical components and 3D printed parts are required to complete this unit and are all detailed in the instructions. Once finished you will have a fully nimated Camtono that will open and close with sound and light effects.

THIS IS NOT A FINISHED PRODUCT – BUT A DIY KIT

See it in action click here

Please visit our social sites for pictures and video demos of the rig in action.
YouTube
Facebook

Disclaimer:
This product is a fan-made cosplay accessory. It is not affiliated with, endorsed by, or licensed by Disney, Lucasfilm, or any other company. All character names, trademarks, and copyrights are the property of their respective owners. Any names or terms used are for descriptive purposes only.

The post Mandalorian Bounty Hunter Camtono Animated/Electronic DIY Kit appeared first on Engage Cosplay.

The Inferno brings light and sound and even smoke/fog (machine not included) to your Jetpack.
Triggered wirelessly the unit has light and sound included. Add the optional Fan kit if you intend to add/use a smoke machine (not included).

Includes:
PCB
LED Rings
RF Transmitter & Receiver
Beacon LED’s
Aux cable
USB Cable

Optional Fan kit includes:
Fans
Relay
9v Battery case (battery not included)
3D Printed parts for fans

CLICK HERE FOR FULL PRODUCT INFO

Please visit our social sites for pictures and video demos of the unit in action.
YouTube
Facebook

Disclaimer:
This product is a fan-made cosplay accessory. It is not affiliated with, endorsed by, or licensed by Disney, Lucasfilm, or any other company. All character names, trademarks, and copyrights are the property of their respective owners. Any names or terms used are for descriptive purposes only.

The post Engage Inferno – Jetpack Electronics – Lights and Sound – Fog Machine Support appeared first on Engage Cosplay.

Our Mandoputers just got an upgrade!
New Board and now includes 3D printed case. Display is 1.14″

These are using the amazing Breazile setup and designed for Beskar gauntlets.
Case is designed for GreatApeStudio Gauntlets at 100 or 105%

Each setup comes configured and prewired, the new boards can also charge the battery. (Battery NOT included). Or if preferred power via USB C (cable not included).

We recommend the Adafruit 500mAh battery (others may be compatible but larger sizes may not fit in the case properly).
https://www.adafruit.com/product/1578

PRE BESKAR MANDOPUTERS

***Always Check Polarity!***
Not all devices follow the same polarity so always (always!) double-check the LiPo battery port polarity on your device before connecting a battery. If the polarity (+ and -) is different to the board, you must switch the JST connector wires over.

Disclaimer:
This product is a fan-made cosplay accessory. It is not affiliated with, endorsed by, or licensed by Disney, Lucasfilm, or any other company. All character names, trademarks, and copyrights are the property of their respective owners. Any names or terms used are for descriptive purposes only.

The post Mandalorian ‘Pre Beskar Mandoputer’ Display + 3D Printed Case (Great Ape Gauntlets) appeared first on Engage Cosplay.

Bring an extra level of realism to your Star Wars costume and smiles to the faces of those you interact with. Each unit can take upto 50 sounds (depending on character).
Note – this is a single profile device. For multiple profile requirements our PRO model can have upto 6 characters installed at once.

We have prepared fantastic template setups for each character available which can be viewed and downloaded on the main site – engagecosplay.com

The materials we use are meant to last. The buttons are a closed unit ensuring no corrosion from sweat.
The board is slim and protected by heat wrap.

A 3.5mm Aux cable and micro usb cable are also included. All you will need is a power bank and speaker with aux input. Further information can be found here – https://engagecosplay.com/engage-5-instructions/

We recommend either of these power packs –
Anker Power Bank, Ultra-Compact 5,200mAh
Anker Power Bank, 313 Portable Charger (PowerCore Slim 10K)

The unit is classed as a low power co summation device and many powerbanks do not recognise use this and auto shut off.
The above recommended power banks have a trickle mode to prevent auto shutdown.

Please visit our social sites for pictures and video demos of the rig in action.
YouTube
Facebook

Disclaimer:
This product is a fan-made cosplay accessory. It is not affiliated with, endorsed by, or licensed by Disney, Lucasfilm, or any other company. All character names, trademarks, and copyrights are the property of their respective owners. Any names or terms used are for descriptive purposes only.

The post Star Wars Cosplay Sound Unit 5 Button | Multiple Characters to Choose from appeared first on Engage Cosplay.

Our Mandputers just got an upgrade!
New Board and now includes 3D printed case. Screen is 1.3″

These are using the amazing Breazile setup and designed for Beskar gauntlets.
Cases are designed for Chamanleaon_FX, Great Ape and Galactic Armory Gauntlets and are available for 95, 100 & 105% sizes (100 & 105% for Galactic Armory).
Each setup comes configured and prewired, the new boards can also charge the battery. (Battery NOT included). Or if preferred power via USB C (cable not included).

We recommend the Adafruit 500mAh battery (others may be compatible but larger sizes may not fit in the case properly).
https://www.adafruit.com/product/1578

***Always Check Polarity!***
Not all devices follow the same polarity so always (always!) double-check the LiPo battery port polarity on your device before connecting a battery. If the polarity (+ and -) is different to the board, you must switch the JST connector wires over.

Disclaimer:
This product is a fan-made cosplay accessory. It is not affiliated with, endorsed by, or licensed by Disney, Lucasfilm, or any other company. All character names, trademarks, and copyrights are the property of their respective owners. Any names or terms used are for descriptive purposes only.

The post Mandalorian Beskar Mandoputer Display + 3D Printed Case appeared first on Engage Cosplay.