Initial Setup Guide
This guide will walk you through setting up your Engage Core for first use.
📦 What You’ll Need
- Engage Core device
- USB power source
- Speaker with 3.5mm aux port.
We can recommend any Anker Power bank that includes their ‘trickle charge’. For example the ANKER Ultra-Compact 5,200mAh or ANKER 323 Power bank 10,000mAh.
🔌 Connecting devices
Connecting up the Engage Core is very straight forward.
Using the included cables connect the Micro USB to the unit and then to your power bank and the unit will automaticall power on.
Then connect the Aux cable to the unit and then to your speaker.
Pressing any of the buttons will trigger the associated audio.
You can view the setup process here -> Setting up the Engage Core
**NOTE – If the unit is connected to a computer it will not generate sounds from pressing buttons. It is in transfer mode. It needs to be connected to a power pack.**
Was this article helpful?
Your feedback helps us improve these guides.